Working capacity 100-150ton/hour dredging depth 25m gold mining machine dredger

gold dredger

Gold mining machine dredger technical process

The material from the bucket transported into the trommel screen with reamers which can ream and wash the clay off,then classified into 3sizes ≤6mm,6-15mm,>15mm,the biggest size material >15mm useless are directly discharged to waste area by scrap sluice;
6-15mm material into shaking sluice to get gold nugget, scrap material discharged into the waste area;
The material <6mm getting into the material box through sand pump feeding into a horizontal automatic discharge gold concentrator,then concentrate get into concentrator box, scrap material to be get rid.

Gold mining machine dredger detail parameter

Production Name	Specifications	Quantity	Power /KW	Remark
Pontoon	Single width 2m,height 1.15m,Length 47m	1set	-
Bucket system	Main frame height:5.6m Double 16#U steel Arms under water:42m 12#/10#U steel 70#Bucket 102pcs Chain 204pcs Chain:High manganese steel welding Reducer:1500#	1set	75
Trommel screen	The trommel fixed with Reamers: length 2.2m Mesh length:3m,inner diameter:1.3m outside diameter:1.6m Frame:15#square pipe	1set	7.5
Gold concentrator	1200#Horizontal automatic discharging gold concentrator	1set	21.5	PLC control
Shaking sluice	1350*4500mm	1pcs	3
Arms winding engine	650#reducer	1pcs	18.5
Main Anchor	500#reducer	1pcs	15
Winch of anchor line	3KW	4set	12
Water pump	7.5KW	1pcs	7.5
Centrifugal pump	7.5KW	1pcs	7.5
Sand pump	4inch	1pcs	11
Electricity cabint	Including the electricity wire to machine	1set	-
Power	Power170KW(advise to use230KW generate set)