250-300m3/hour gold mining machine vibraitng screen mining machinery

Gold mining machine,mining machinery technical process
The raw material getting into feed hopper then into vibrating screen by swilling of high pressure water to be classified into 3size,the big size,the normal size, the small size,the one in big size useless is directly to get rid to scrap pool.
The one in normal price to be recovered by 2fixed gold sluice with carpet,the scrap material to be transported by conveyor after the bucket chain machine taking water off.
The one in small size get into desliming machine by pumping of 1set 8inch sand pump (it’s efficiently the recover of gold concentrator by preventing surface gold covered by the muddy mineral),then the clay-off mineral getting into 2set of horizontal gold concentrator to get concentrate into mineral box,the scrap into scrap pool which finally transported to destination by conveyor after the process of taking water off by buck chain machine.
Gold mining machine,mining machinery detail parameter

Production Name	Specification	Quantity	Power	Unit price	Total price	Remark
Feed hopper	4000*5000mm	1pcs	-
Vibrating screen	1st floor: top 3m with suck rod(to protect screen mesh),the other 3m with polyurethane screen mesh, The 2nd floor: with polyurethane screen mesh.	1set	18.5			Including base plate,holding frames etc
Desliming machine	1500*3500mm 0.55KW	2set	1.1
Gold concentrator	Horizontal automatic type 21.5KW/set	2set	43
Fixed gold sluice	1000*6000mm With carpet	2pcs	-			With gold carpet
Bucket chain machine	60# 11KW	2set	22	90000	180000
Sand pump and mineral box	8inch	1set	22	19000	19000
Sand pump and mineral box	6inch	1set	15	15000	15000
Transport conveyor	Belt width 600mm,pole length 6m,3KW	2pcs	6	17000	34000
Centrifugal pump	11KW	1set	11	6000	6000
Water pump	5.5KW	2pcs	15	3500	7000
Electric box		1pcs	-	8000	8000
Total power	153.6KW